Membrane d'étanchéité HDPE autoadhésive

Membrane d'étanchéité autoadhésive en polyéthylène haute densité (HDPE)

The waterproof membrane is made with pre-paved full bonding installation and does not require full bonding of the protection layer and the structure.

1.Product overview

Membrane d'étanchéité autoadhésive en polyéthylène haute densité (HDPE) is a polymer waterproof membrane that is made by compositing HDPE with water-resistant and ultraviolet-resistant polymer gel with a special process.

2.Caractéristiques du produit

① High strength: it can effectively prevent breakage or puncture without a protection layer and can be poured with concrete after being bound with steel reinforcements.

② Full bonding with structural layer: it can form permanent bonding with concrete to achieve high bonding strength and good water locking effect and also can prevent moisture seeping into the structure effectively.

③ Preventing damages caused by foundation settlement to the waterproof layer: with foundation settlement, the protection layer can tear the traditional waterproof layer. The materials with pre-paved full bonding installation can be bonded with structure to avoid damages.

④ Shorter work period: the pre-paved full bonding installation has low requirements for base surface and shortens the work period by 1/3 compared with common membranes.

High strength, high bonding force, transverse-flowing water prevention, convenient application

3.Product Classification and specification

4.Type

   Have Three kind 

Membrane d'étanchéité autoadhésive en polyéthylène haute densité (HDPE) with release film

Membrane d'étanchéité autoadhésive en polyéthylène haute densité (HDPE) with Sand   Lap adhesive 

Membrane d'étanchéité autoadhésive en polyéthylène haute densité (HDPE) with Sand   Welded 

5.Domaine d'application

Applicable to parts subjected to pre-paved full bonding installation